Software Installation On Hyper-V Server 2008; Installing The Software - Dell PowerEdge UPS 500T Installation Notes

Software Installation on Hyper-V Server 2008

This chapter provides the procedures for installing the Dell UPS Management Software on a computer
that is running Microsoft Hyper-V Server 2008.
Instructions are also provided for starting the software and modifying settings in the Hyper-V Server
2008 environment.

Installing the Software

To install the software on the Hyper-V Server:
NOTE:
You can start the installation from the CD (F618R A04 or higher) provided with the UPS, or you can
download the software from the Dell Web site (support.dell.com).
1
To install the software from the CD, continue to Step 2. To install the software from the Console
window proceed to Step 5.
2
Run setup.exe from the CD drive: \Windows directory.
The installation interface window opens (see Figure 5).
3
Click next to complete the installation.
4
Proceed to Step 7.
Software Installation on Hyper-V Server 2008
3
|
9