Warning About Moving Parts; Electrical Safety Guidelines - HP StorageWorks P9000 - Disk Arrays Manual

Hp storageworks p9500 site preparation guide (av400-96306, november 2010)
Hide thumbs Also See for StorageWorks P9000 - Disk Arrays:
Table of Contents

Advertisement

and ramps to a raised computer room floor. Move the cabinet slowly and deliberately, and
make sure that the floor is free from foreign objects and cables that the cabinet could roll over.
WARNING!

Warning about moving parts

Even though customers do not install or maintain equipment, these guidelines are provided to
prevent possible injury when working with authorized service personnel. Observe the following
warning related to moving parts:
Tuck in any loose clothing so that it cannot be caught by a moving or rotating part such as a
fan.
Tie up long hair.
Unless otherwise specifically instructed, do not supply power to any device that contains
rotating or moving parts that are not properly covered.

Electrical safety guidelines

Even though customers do not install or maintain equipment, these guidelines are provided to
prevent possible injury when working with authorized service personnel in the area where equipment
is installed. Observe the following electrical safety guidelines:
Disconnect all power before installation, deinstallation, or moving equipment.
Ensure that the voltage and frequency of your power source match the voltage and frequency
required by the system.
All equipment should be properly grounded for proper operation and safety. To reduce the
risk of electric shock or damage to equipment, follow proper grounding procedures.
To avoid injury, wear protective footwear when moving equipment.
Work safety guidelines
9

Advertisement

Table of Contents
loading

Table of Contents