Advertisement
PipeRider® Cable Modem User's Guide
Wall Mounting Procedure
Step 1.
The PipeRider cable modem can be mounted on the wall using two screws and the two mounting slots on the
bottom of the unit. When mounted, the orientation of the cable modem will be as shown below.
Step 2.
Use the template below to mark the screw locations.
Step 3.
Insert and secure screws to the wall. The screws should not be secured flush to the wall. Leave a gap of
approximately 0.6 cm from the wall surface to the bottom of the screw head.
Step 4.
Slip the PipeRider slots over the screw heads and pull down until the unit is seated securely. A slight adjustment
to the screws may be necessary to provide a snug fit to the wall.
HM200c/HM201c
10 cm
Advertisement
