Rack Stability; Symbols In Text - Compaq StorageWorks b2000 - NAS Quick Start Manual

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
•
•
•
•
•

Symbols in Text

These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific
instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points of
information.
NAS B2000 Quick Start Guide
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled in multiple-rack installations.
Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.
About This Guide
vii