To Adjust Program Schedules - Honeywell PRO TH4000 series Owner's Manual

PRO TH4110D / TH4210D
-
i
Press SET3 times, then adjust time.
Press SET, then set desired temperature.
1. Press SET until Set Schedule is displayed.
2. Press A or _' to set your weekday Wake
time (Mon-Fri), then press SET.
3. Press _. or y to set the temperature for this
time period, then press SET.
4. Set time and temperature for the next time
period (Leave). Repeat steps 2 and 3 for each
weekday time period.
5. Press SET to set weekend time periods (Sat-
Sun), then press HUN to save & exit.
Note" Make sure the thermostat is set to the system
you want to program (Heat or Cool).
Note" To aancel an unwanted time period (except
Wake), press and hold _. + HOLD for 4 seconds
while in the Set Schedule mode.
11