Date & Time; Welcome Screen - HP Photosmart 720 SERIES User Manual

This setting determines the current date and time for the
camera. This is usually done when you first set up the camera,
but you may need to re-set the date and time when you are
travelling to different time zones or when the batteries are out
of the camera for more than10 minutes.
] tn the Setup menu, select _te & Time.
2 Follow the same procedure used in SeHin 9 the da_ and
time on page 17.
W÷kome screen
This setting determines the image that appears when the
camera is turned on. You can select any image available in the
camera or the HP logo, which is the default setting.
] In Playback mode, scroll to the image you want by using
the _ _ buttons, then press OK to display the Main menu.
2 In the Main menu, select the Setup _ option.
3 In the Setup menu, select Welcome Screen.
4 SelectThis _moge to use the
current image, HP Logo to return
to the factory setting, or Exit to
leave the current welcome screen
unchanged.
5 PressOK to activate the selection
you made in the previous step.
38 hp photosmart 720 user's manual