Nikon COOLPIX S4000 User Manual page 91

Rotating the zoom control to T (c() in full-frame
playback mode (_ 75) enlarges display of the center
portion of the current picture.
• The guide displayed at bottom right shows the
portion of the image currently displayed.
The following operations can be performed while
picture display is enlarged.
Zoom in T((_)
Zoom Out W ([])
Change the
display area
Delete pictures
frame playback
crop picture
ff -_
@
Switch to
_
Shooting mod e
Description
Zoom increases each time the zoom control is
rotated to T (q), to a maximum of 10x.
Zoom decreases each time the zoom control is
rotated to W (_;_). When the magnification
ratio reaches l x, the display returns to full-frame
....................................................
The area of the picture currently displayed can
be changed by dragging the picture.
Tap _ to delete the picture.
Tap I_ to switch to full-frame playback.
Tap I1_ to crop current picture to contain only
the portion visible in the monitor.
Press the I_1 button or the shutter-release
button.
32
33
18
32
Pictures Taken with Face Priority
When zooming in (playback zoom) on a picture taken
using the face priority function (_ 56) by rotating the
zoom control to T (c(), the picture will be enlarged
with the face recognized with shooting at the center of
tile monitor (except pictures taken with Continuous,
BSS,and Multi-shot 16; _ 53).
• If more than one face was recognized, tile picture
will be enlarged with the face on which focus was acquired at the center of the
monitor. Tap _ or r_ to display other recognized faces.
• When the zoom control is rotated to T (c() or W (_;_) to adjust the zoom ratio,
the center of the picture (normal playback zoom display), rather than the face, is
displayed at the center of the monitor.
o_
o
f
g-
79