Nikon COOLPIX S4000 User Manual page 47

_1_ Notes on Touch Shutter
• When taking pictures with Continuous or BSS in Continuous setting (_ 53) enabled, or in
Sports or Museum scene mode (_ Sg), use the shutter release button to take pictures. Only
one picture can be taken at a time using the touch shutter function,
• Prevent shooting with accidental tapping of the monitor in I_1 (auto) mode and some scene
modes by changing the touch shooting setting to Touch AF/AE (_ 37). At this setting, the
shutter is not released when the monitor is tapped.
• in some rare cases, shooting subjects with which autofocus may not perform as expected, the
subject may not be in focus (_ 31),
• When a subject displayed in the monitor is tapped with the sel_timer (_ 44) enabled, the
camera locks focus and releases the shutter after ten or two seconds,
[] Shooting Modes That Support Touch Shutter
Touch shutter can be enabled in shooting modes other than I_1 (auto) mode as well. Touch shutter
operation differs according to the current shooting mode as follows.
Shooting mode
I_1 (auto) mode ([_..) 26),
Sports, Party/indoor,
Beach/snow, Close-up, Food,
Museum, Copy, and Backlight
scene modes ([._[_ 59)
Scene auto selector scene
mode ([_ 59) and smart
portrait mode (when Smile
timer is set to Off; [_ 72)
Portrait and Night portrait
scene modes ([_ 59)
Dusk/dawn, Night landscape,
Fireworks show. and
Panorama assist scene modes
(_ S9)
Smart portrait mode
(when Smile timer set to On;
F,"
o
o
Touch shutter operation
o_
TaD me in_enaea suoject, Focus and exposure are set for the
_ma TaDDed. When the camera recognizes more than one
race. tap a face framed by a single border to set focus and
exposure for that face
• Nhen the camera recognizes a face, focus and exposure are
set for the area framed by the double border, When the
-amera recognizes more than one face, tap a face framed
ov a single border to set focus and exposure Mr that face.
Nhen no race is recognized, the camera focuses at the area
_auued,
Dnlv a border disolaved by the face priority function can be
selected. When the camera recognizes more than one face,
_a ] a face framed by a single border to set focus and exposu re
for that face
ocus and e 9osure are set for the same focus area used
wnen Dktures are taken by pressing the shutter release
Du_on, See "Selecting a Scene Mode to Take Pictures
(Features)" (_ 62 for more information.
Touch shutter cannot be enabled. When the camera
fete{ nizes more than one face, tap a face framed by a single
[._ 72_ border to move the focus area to that face
D
o
d)
3S