Nikon COOLPIX S8200 Reference Manual page 71

m
o
The Shooting Menu (for I_1 (Auto) Mode, Continuous Shooting Mode)
Using Preset Manual
Preset manual is used with mixed lighting or to compensate for lig ht sources with a
strong color cast when the desired effect has not been achieved with white balance
settings like Auto and Incandescent ([or example, to make images shot under a
lamp with a red shade look as though they had been shot under white light).
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Display the shooting menu ([_[_ 11,37), use
the multi selector to select PRI L" P reset manual
in the White balance menu, and press the _]_
button.
• The camerazooms in to tile position for measuring
white balance, l,_,_
3
Select Measure.
• To apply the most recentlymeasured white balance
value,select Cancel and pressthe _) button. The
white balancesetting will not be measuredagain and
the most recently measuredvalue will be set.
4 Frame the reference object in the measuring
window.
Measuring window
5 Press the _ button to measure a value for preset manual.
• The shutter is releasedand the new white-balance value isset. No image is saved.
_il Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.