Cable Tv - Panasonic CT-34WX50 Operating Instructions Manual

Cable TV
h
*s_GT O
O WtVlI3£_ O
CH
E}0T
REW _ SPLIT
_ i h SWAP¸¸
Wt_q _ _ _E
O_m_C_E SLC, ff 5TILL
® @ ®
® @ ®
® ® ®
o ® o
ANTENNA TERMINAL ON
THE BACK OF THE TV
IncomingCable from Antenna
or Cable TV System.
When the antenna cable is connected to the
TV antenna terminal via a cable box or VCR,
set the TV channel to CH3 or CH4.
This does not apply when signal is input from
VIDEO INPUT.
Confirming
confirm that registration with cable TV and connection of equipment
are completed. Turn the cable TV tuner and select the desired volume
level.
Press while pointing the remote control towards
the cable TV tuner.
Note:
The remote control code number is set for
Panasonic products.
When peripheral equipment do not operate, reset
code ( See page 61 and 62 ).
Operate the cable TV tuner and select the desired volume level.
27