Automatic Answering Operation
When the unit answers a call, a greeting message is played and the
caller's message is recorded.
Setting the Unit to Answer Calls
Press (ANSWER ON) to turn on the answering
system.
,,The indicator lights and "Answer set" is
heard.
,,The unit will announce the remaining
recording time if it is less than 5
minutes.
,,If you hear "Memory full", "r'_"
is
displayed on the base unit and the
ANSWER ON indicator flashes rapidly,
erase some, or all, of the messages
(p. 32).
(ANSWER ON 1
and Indicator
,,If you do not want the unit to answer calls, press [ANSWER
ON} again to turn off
the answering system. The indicator light goes out and "Answer off" is heard.
,,You can also turn on the answering system remotely using any other phone
(p. 39).
Monitoring incoming calls
While a call is being recorded,
you can monitor
it through
the speaker.
To answer the call, press
_
or (_.
The unit stops recording.
28