Table of Contents
Advertisement
From the Handset
If someone else is in the room and you want to listen to the recorded
messages privately, you can use the handset.
Handset:
Press (FLASH/CALL WAIT/PLAYBACK).
•The number of new messages is heard on the handset.
Base unit:
To listen to messages:
Press
[MESSAGE PLAYBACK/SLOW TALK).
When you have new messages:
the unit announces the number of
new messages and only new
messages are played back.
When you have no new messages:
the unit announces
"No new messages. All message
playback" and plays back all
messages.
When you have no messages:
the unit announces "No messages".
•The messages will be heard on
the handset,
•[MESSAGE PLAYBACK/SLOW TALK],
[REPEAT], _
and [S-f-0_* can also
be used during playback (p. 30).
When finished, press (FLASH/CALL WAIT/PLAYBACK) or place the
handset on the base unit.
.You can also listen to messages without using the base unit. See page 40.
*When you press _
during playback, operation is stopped.
To resume the playback, press [MESSAGE PLAYBACK/SLOW
TALKJ within 15
seconds, or the voice menu will start (p. 40).
3/
Advertisement
Table of Contents
