Automatic Answering Operation; Listening To Messages - Panasonic KX-TG2356S Operating Instructions Manual

Automatic Answering Operation

∫Setting the unit to answer calls
Press to turn on the answering system.
[ANSWER ON]
≥The indicator lights and "Answer set" is heard.
≥The unit will announce the remaining recording time if it is less than 3 minutes.
≥If you hear "Memory full", "
indicator flashes rapidly, erase some, or all, of the messages.
≥If you do not want the unit to answer calls, press [ANSWER ON] again to turn off the
answering system. The indicator light goes out and "Answer off" is heard.
≥You can also turn on the answering system remotely using any other phone.
You can see the total number of recorded messages on the base unit display. If
MESSAGE indicator flashes on the base unit and "New message" is displayed
on the handset, new messages have been recorded.
To play back messages, press [MESSAGE].
When you have new messages;
the unit announces the number of new messages and only new messages are
played back.
When you have no new messages;
the unit announces "No new messages. All message playback" and plays back all
messages.
When you have no messages;
the unit announces "No messages".
" is displayed on the base unit and the ANSWER ON
FULL

Listening to Messages

– 11 –