Table of Contents
Advertisement
Line Mode
If the line is connected to a low voltage system such as a PBX, set to "B".
Your phone comes from the factory set to "A".
Make sure the unit is not being used and the handset is lifted off the
base unit.
Press (PROGRAM1.
•The TALK/MUTE indicator flashes.
Press
(FLASH/CALL WAIT/PLAYBACK).
°"P" is displayed on the base unit.
Press I_.
• The current setting is displayed on the
base unit.
To select "A", press _.
OR
To select "B", press _.
°The setting is displayed on the base unit.
Press (PROGRAM).
•A beep sounds.
TALK/M UTE
Indicator _-
[FLASH/CALLWAIT/PLAYBACK
/ 3
Advertisement
Table of Contents
