Related Manuals for Altinex DA1206RM
Summary of Contents for Altinex DA1206RM
-
Page 1: Distribution Amplifiers
DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0002-003 PRODUCT REVISION: 1 DA1206RM 1–IN, 2-OUT RGBS DISTRIBUTION AMPLIFIER USER’S GUIDE... -
Page 2: Table Of Contents
INTRODUCTION Thank you for purchasing the DA1206RM Video Distribution Amplifier. We are sure you will find it reliable and simple to use. Superior performance for the right price, backed by solid technical and customer support is what Altinex has to offer. -
Page 3: Precautions / Safety Warnings
To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the DA1206RM Distribution Amplifier in direct sunlight, near heaters or heat radiating appliances, or near any liquid. -
Page 4: About Your Distribution Amplifier 2
Though primarily designed to pass RGBS format signals, the DA1206RM can also pass RGsB, Component Video (Y, R-Y, B-Y), S-Video (Y/C), and Composite Video by using the appropriate analog channels (Red, Green, Blue). -
Page 5: Description Of Da1206Rm
Vertical Power Internal Power Supply Table 3. DA1206RM Electrical DESCRIPTION OF DA1206RM DISTRIBUTION AMPLIFIERS 47-180 Hz 90-140V/200-240V... -
Page 6: Sync Polarity Switch
1.0V position for shorter cable lengths as the increased level may reduce the life of CRT displays if they are overdriven. 4.4 POWER The DA1206RM offers an internal 90-140/200- 240V power supply. A variety of different power supplies are available for international use. -
Page 7: Installing Your Distribution Amplifier
Amplifier can be adjusted using Input Termination, Video Level, and Sync Level switches as described in Section no. 4. There are no other adjustments necessary to operate the unit. The DA1206RM will operate successfully as long as cables are attached properly and other technical specifications are followed. -
Page 8: Frequently Asked Questions
TROUBLESHOOTING GUIDE We have carefully tested and have found no problems in the supplied DA1206RM unit; however, we would like to offer the following suggestions Please make sure that the input amplitude levels are as follows. 1. Analog signal is less than 1.5V. -
Page 9: Altinex Policy
11.2 RETURN POLICY It is very important to Altinex that you receive the product that you have ordered and that this product fulfills your need. In the unlikely event,...
Need help?
Do you have a question about the DA1206RM and is the answer not in the manual?
Questions and answers