LOWER CHUTE (See Fig. 5)
Raise and hold deflector shield in upright position,
Place slot in lower chute over tab on mower deck and
position lower chute over deck opening as shown,
Hook rear latch intoflange hole on back of mower deck.
Hook front latch into tab hole on front of mower deck,
Do not remove deflector
shield from mower. Raise and hold
shield when attaching lower chute and
it to rest on chute while
(See Figs. 6A & 6B)
Lower mower deck to its lowest cutting position,
Assemble upper chute by inserting curved end into hole
in back of cover.
NOTE: Handle carefu!ly so as not to damage full bagger
Push in and turn upper chute until it is in line with lower
Align the bosses on lower chute with alignment slots on
upper chute and slide together.
Secure with rubber latch by hooking hole in latch over
Be sure deck is propedy leveled for best mower perfor-
mance. See your tractors owner's manual for instruc-