Advertisement
@
Cutting tips
Clear the lawn from stones and other objects which can be
thrown away by the blades.
Localize and mark stones and other fixed objects to
avoid collision.
Begin with a high cutting height and reduce until the
required cutting result is obtained.
The cutting result is best with high engine speed (blades
rotate quickly) and low gear (machine goes slowly). If the
grass is too long and thick the drive speed can be in-
creased by selecting a higher gear or reducing the
motor speed, without affecting the cutting result.
The best lawn is achieved if the grass is cut often. Cutting
becomes more even and the cut grass is more evenly
distributed over the surface. Total time taken is not
greater,
since higher drive speed can be selected
without affecting the cutting results.
Avoid cutting wet grass. The cutting results will be worse
since the wheels
will sink into the soft lawn.
Spray the cutting unit with water underneath after use.
5
53
Advertisement
