Dacor PREFERENCE RENAISSANCE COOKTOP Use And Care Manual page 7

Standard Burners
Burner and Grate Assembly
1 Put the burner heads on the burner bases as
is cool.
SimmerSear Burner
•
•
•
•
Place the burner skirt over each SimmerSear
burner head and base as shown• On model
RGC365 be sure to match the correct size. 3.
Put the burner cap on the burner head of each
SimmerSear burner as shown below• Center the
bottom of the cap inside the base• On model
RGC365 be sure to match the correct size.
Put the cap cover on top of each SimmerSear
TM
burner cap. The ridge around the bottom edge of
the cap cover goes around the top of the burner
cap. On model RGC365 be sure to match the
correct size.
___--_-_ _q_--Cap cover
___-__ _ Burner cap
Wide side
_--Skirt
__: _Burner head*
_ _F--Base
SimmerSear Burner Assembly
*The burner head on the SimmerSear burner
assembly is permanently attached to the burner
base. It cannot be removed by the customer.
shown below. Match the correct sizes. The
bottom of the correct size burner head fits on
top of the matching burner base. Line up the
notch on the bottom of each head with the
ignitor on the matching base.
Twist each head back and forth slightly to make
sure it is properly seated.
Put the cap covers on top of the burner heads.
The ridge around the bottom edge of the cap
cover goes around the top of the burner head.
Line up notch
with igniter
_ Cap cover
Burner head
Burner base
Standard Burner Assembly
Grates
Gently set the grates on top of the spill tray. Put the
legs of each grate into the corresponding dimples.
5