Table of Contents
Advertisement
Electrical
Shock Hazard
DO NOT plug into electrical
supply
until assembly
is complete,
Failure
to do so could result in electrical
shock or injury.
1, Insert wand(s) into Power-Mate_ untilthe
wand buttons snap into place,
To remove:
Step on
wand quick
release
pedal, then
pull up on
wands.
Release
al
Indicator
Release
Pedal
Pile Height
Pedal
1. Lower wand from upright position by
pressing on the handle release pedal.
!
CAUTION
DO NOT leave the Power-Mate_
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
2. Select a pile height setting by pressing the
small pedal on the rear of the Power-Mate®.
The pile height setting shows on the indica-
tor. See SUGGESTED
PILE HEIGHT SET-
TINGS.
Attention:
Refer to your carpet manufactur-
ers cleaning recommendations. Some more
delicate carpets may require that they be
vacuumed with the Power-Mate® agitator
turned off to prevent carpet damage.
5
Advertisement
Table of Contents
