Kicker HCVR12 Installation Instructions
Kicker HCVR12 Installation Instructions

Kicker HCVR12 Installation Instructions

Sealed enclosure systems

Advertisement

Sealed Enclosure Systems
Congratulations! You have just purchased one of the most flexible subwoofers
yet from KICKER. Your CompVR sub is designed to give you great bass perform-
ance in a wide variety of applications. These installations instructions will help you
get the most out of your new KICKER sub. Thanks for buying KICKER. Enjoy!
These enclosures combine KICKER's CompVR woofer with computer
designed and human-fine-tuned enclosures. They offer a level of bass per-
formance never before thought possible from a commercially available
enclosure. The HCVR Series enclosures are covered in carpet for protection
and pre-loaded with a CompVR woofer.
KICKER HC enclosures are engineered to provide the best bass response
when mounted in the rear hatch or trunk.
M M odel
Woofer
H H CV V R R 1 1 2 2 C12VR
NOTE:
*The two ohm unit should be used with the KX Series Class D amplifiers KX550.3, KX700.5, KX400.1,
and KX600.1. It is not recommended for use with any KX two or four channel amplifiers.
The four ohm unit should be used with any KX Series two or four channel amplifier. It is not rec-
ommended for use with any KX Series Class D amplifiers.
HCVR12
Installation Instructions
FRONT
Move enclosure around and mount it

Specifications

Imp.
Power
Handling
(Watts)
*2,4
400
REAR HATCH
or TRUNK
where it sounds best to you.
Top
Bottom
Depth
Depth
(In., cm)
(In., cm)
1 1 0 0 -13/16,27.5
1 1 4 4 , 35.56
Height
Width
(In., cm)
(In., cm)
1 1 5 5 , 38.10
1 1 7 7 -3/16, 43.66

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HCVR12 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kicker HCVR12

  • Page 1 Sealed Enclosure Systems Congratulations! You have just purchased one of the most flexible subwoofers yet from KICKER. Your CompVR sub is designed to give you great bass perform- ance in a wide variety of applications. These installations instructions will help you get the most out of your new KICKER sub.
  • Page 2 Mounting After determining the best mounting position, check carefully in the areas where the mounting brackets will go. Make very sure that the mounting screws will not puncture the gas tank, brake lines, wire harnesses, etc., or interfere with any mechanical items on the underside of the chosen mount- ing surface.
  • Page 3 THREE (3) MONTHS from date of original purchase. When purchased from an Authorized KICKER Dealer it is warranted for ONE (1) YEAR from date of original purchase. If the product is labeled “B Stock” and purchased from an Authorized KICKER Dealer, it is warranted for THREE (3) MONTHS from date of purchase, regardless of place of installation.

Table of Contents