Indicator Light; Related Documentation - Epson 4180 Manual

Indicator Light

The indicator light (on the ] Start button) indicates the status
of the scanner, as described below.
Light Color Status
On Green The scanner is ready to scan images.
Flashing Green The scanner is initializing (warming up) or is
busy scanning.
Flashing Red Check the following, then turn your
scanner off and back on to reset it:
If this does not clear the error, the
fluorescent lamp may need to be replaced
or the scanner may have another problem.
Consult your dealer or Epson.
Off — The scanner is unplugged or turned off.
Make sure the transportation lock is in
the unlocked position, as shown on
page 1.
Try restarting your computer and
turning the scanner off and then on
again.

Related Documentation

CPD-18186 Epson Perfection 4180 Photo Start Here
poster
CPD-18187 Epson Perfection 4180 Scanner Software
CD-ROM, including online Reference
Guide
CPD-18188 Epson Perfection 4180 Notices booklet
6/04
Epson Perfection 4180 PHOTO
Epson Perfection 4180 PHOTO - 7