Sharp FO-NS2 Operation Manual page 36

Installing the Network Scanner Software
2
Enter any name you wish for the Process Definition Prefix and any
letter for Initial, and click Next. Click Help for detailed information.
•
The name of your computer initially appears in the Prefix box. If you
wish to change the prefix, enter a name in 6 characters.
•
Enter any letter for the Initial (the initial is not used on the FO-
DC500/600, however, an entry is necessary).
•
The Process Definition defines instructions for how the image will
be processed once it arrives at the computer.
3
Check the Process Definitions you wish to use and click Next.
•
Network Scanner Tool is shipped with 3 pre-defined sets of
instructions called Process Definitions if you install both Sharpdesk
and Network Scanner Tool. The "Process Definition Prefix" that
was set in Step 2 appears in the displayed name of each process
("Sharp" is used for the prefix in the examples below).
32