Battery Installation; Turning The Power On - Sharp HT-CN400DVA Operation Manual

Battery installation

1 Open the battery cover.
2 Insert the supplied batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
nals.
3 Close the cover.
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Incorrect installation may cause the unit to malfunction.
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
" Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
" Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and vibrations.

Turning the power on

! Test of the remote control
Check the remote control operation after making all the connections (see pages 12 -
15).
battery termi-
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your
system.
! To turn the power on
Power stand-by indicator
Press the ON/STAND-BY button.
If the power does not turn on, check the AC power lead is plugged in properly.
To set the unit to the stand-by mode:
Press the ON/STAND-BY button again.
The power stand-by indicator lights up.
HTCN400_500DVA_A2.fm
03/10/24
Remote sensor
0.2 m - 6 m
(8" - 20')
OPEN/ ON/
ON/
CLOSE STAND-BY
SET UP MUTE
STAND-BY
TITLE SUBTITLE LANGUAGE DISPLAY
MENU/PBC ST/MO
ENTER
92LCN400A0270
HT-CN400DVA
HT-CN500DVA
3
17