Sharp HT-CN400DVA Operation Manual page 9

" Main unit (rear panel)
2 3
1
1. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Audio Input Sockets 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. Audio Output Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
5. Video Output Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9. S-video Output Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4 5 6
9
Reference page
Cooling fan
This unit is fitted with a cooling fan at the rear for improved cooling. Do not cover the
opening in this section with any obstacles.
Caution:
! The unit will get warm whilst being used. Do not touch the warm areas of the unit
! This unit is equipped with a special function which protects the amplifier circuit
7
The rating label is located on the bottom of the unit.
Cooling fan
for prolonged periods to avoid damage to you.
from damages. When it is activated, the sound switch is turned off. In this case,
unplug the unit and, after 15 minutes or more, plug it in again.
HTCN400_500DVA_A1.fm
03/10/24
HT-CN400DVA
HT-CN500DVA
8
9
92LCN400A0270
1