Setting Up Ftp Server Destinations - Sharp AR-NS1 Operation Manual

Chapter 2 Getting Started

Setting up FTP Server Destinations

FTP Destinations are defined on the FTP Destination Control Page. To set up this scanning
destination, enter information in the fields according to the parameters listed in the table that follows
the FTP Destination Control page. After entering all the necessary information, click the Submit
button to add the destination and return to the Network Scanner Management page. Around 100
destinations (see *1. & 2. of page 11) can be stored in conjunction with those of the other 2 kinds of
destination.
You can now access this destination from the front panel of the copier.
Item
FTP Destination
Name
Host Name or IP
Address
FTP User Name
(can be omitted.)
Password
(can be omitted.)
Directory
(can be omitted.)
Enable E-mail
Hyperlink Check
Box and E-mail
Address
Description
Input the destination name here with up to 18-character per
destination name. The name input here is displayed on the
touch panel screen of the copier. Do not enter the
destination name
(especially the one registered for the other 2 kinds of
destination).
Character field for the FTP server name either as an IP
address or a host name.
Character field for the FTP user name within 50 characters.
Character field for the FTP password within 50 characters.
Character field to specify a directory on the FTP server
within 200 characters.
Notifies the recipient of a file with an e-mail that the file on
the FTP server is sent. For notifying, input the e-mail
address of the recipient here and check the check box. The
recipient FTP server name is described in the hyperlink
format on the e-mail.
here which is already
12
Default
registered
Unchecked