Using Tel Mode - Sharp FO-51 Operation Manual

Using TEL Mode

Using TEL Mode
When the reception mode is set to TEL, you must answer all calls by picking
up the fax machine's handset or an extension phone connected to the same
line.
Answering with the fax's handset
1
When the fax machine rings, pick up
the handset.
2
If you hear a fax tone, wait until the
display shows RECEIVING and then
replace the handset.
3
If the other party first speaks with you
and then wants to send a fax, press
START
after speaking. (Press before the
sender presses their Start key.)
•
When RECEIVING appears in the
display, hang up.
42
To select TEL mode, press
RESOLUTION/
RECEPTION MODE
display points to TEL.
RESOLUTION/
RECEPTION MODE
Note: If you have set the Fax Signal Receive setting
(page 44) to NO, press
until the arrow in the
TEL/FAX
Beep
RECEIVING
START
to begin reception.
START
RECEIVING
FAX
TEL
A.M.