Sharp FO-51 Operation Manual page 59

Note: For all units installed in New Zealand, the direct use of the displayed
number for call back does not operate properly and must not be used. It is
necessary to manually enter the verified correct number for the party called.
This will often require the addition or deletion of leading digits from the
number shown on the display when dialling manually.
♦
After you have received 20 calls, each new call will delete the oldest call.
Follow the steps below to view the Caller ID List in the display. If desired, you
can immediately dial a number when it appears.
HOLD/
1
SEARCH
Press once and
2
Press or
3
If you want to dial one of the numbers in the list, scroll through the list
until the number appears in the display.
•
Fax: If you want to send a fax, load the
document and then press
Dialling and transmission begin.
•
Voice call: If you want to make a voice
call, pick up the handset or press
SPEAKER
. Dialling begins automatically.
(If you pressed
handset when the other party answers.)
STOP
4
Press when you have finished viewing the list.
Caller ID (Requires Subscription to Service)
once.
2
to scroll through the list.
START
.
SPEAKER
, pick up the
REVIEWING CALLS
Fax:
Voice
call:
START
57