Advertisement
Choosing a location
The easiest way to set up your projector is to place it on a table
in front of your screen or wall, or on a high shelf behind you.
See the User's Guide for other ways of setting up the projector.
Table
The projector does not have to be aligned with the middle of the
screen. Just make sure it faces straight ahead (at a 90-degree angle
to the screen), and then use the horizontal lens shift dial to position
the image (see "Adjust the image" on the back of this sheet).
The distance between the projector and the screen determines the
size of the image. The diagram below shows approximately how big
your image will be, based on where you set up the projector.
Projector can be offset from
center by up to 25 percent of
the image's width
90º
Distance from projector to screen
25-37'
16.5-25'
8-12'
6.5-10'
5-7.5'
3-5'
2.5-4'
40"
40"
40"
30"
30"
30"
Shelf
100"
100"
100"
80"
80"
80"
60"
60"
60"
300"
300"
300"
200"
200"
200"
Advertisement
