Installation; When Using The Unit On Atabletop - Sharp FU-40SE-K Operation Manual

INSTALLATION

WHEN USING THE UNIT ON A
TABLETOP
FIXING THE STAND
1
Remove the front panel.
• At this time, also remove the pre-filter,
stamina-power carbon and the HEPA
filter.
Front panel
2
Place the unit with its front
side facing down on a flat
and stable surface.
• Place a soft cloth, etc., to prevent
damaging the unit.
3
Insert the tabs on the stand
into the holes on the main
unit and fix the stand using
the supplied thumbscrews
(2 units).
Tabs
Thumb-
screws
1
2
1
Holes
WHEN WALL MOUNTING
CAUTION
• When mounting the air purifier on a wall, the
wall will become dirty as time passes. To pre-
vent this, place a vinyl sheet, etc., around the
unit.
• Ensure that the wall is suitable for mounting
the air purifier.
• Do not install in a location with heavy smoke,
such as in a kitchen, etc. The unit surface may
crack as a result.
1
Determine the mounting location
Leave space around the bracket by referring
to the illustration below. The unit cannot be
mounted if there is insufficient spacing
around the bracket.
75cm or more
75cm or more
60cm or more from
sidewall
CAUTION
Mount on a flat sur-
face
• Do not mount the unit to
a thin wall with little
strength such as a plas-
terboard, etc. The unit
may fall and can be very
dangerous.
E-6
69cm or more from
the ceiling
Size of main
unit
75cm or more
Mounting
bracket 1
60cm or more
from sidewall