Epson PowerLite 835p Quick Setup page 2

2
Press the Zoom buttons to reduce or enlarge the image.
Focus
3
If your image looks like
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely, or press the
buttons on the projector.
4
If your image looks like
on the projector to correct it.
3
Choose a
Presentation Method
How do you want to get images to the projector?
• To connect to a notebook, see "If connecting
to a notebook" below.
• To project over an 802.11g/b network, see
"If projecting wirelessly" on the back of this sheet.
You must have installed the projector's EasyMP
software and configured your projector and
computer before you can project wirelessly.
See your User's Guide for instructions.
• To give a presentation stored on a memory card,
see Chapter 5 in your User's Guide.
If connecting to a notebook...
1
Make sure you've turned on the projector and adjusted the image
as described in sections 1 and 2.
2
Locate the computer cable that came with the projector. Connect
one end to the projector's Computer 1/Component port.
Connect the other end to your notebook's video-out port or
monitor port. If you can't connect the cable to your
PowerBook ® , you may need to use an adapter. See your
PowerLite 835p User's Guide for instructions.
3
Press the Search button on the remote control until your computer
image is displayed.
or , you've placed the projector off
or , press the
Zoom
or Tracking
or Sync buttons
TM