Table of Contents
Advertisement
DVD OPERATION
Basic Playback
Getting started
Turn on the power of the TV, amplifier and any other compo-
nents which are connected to the DVD.
Make sure the TV and audio received (optional) are set to
the correct channel.
When you play NTSC disk, the NTSC signal will convert to a
modified PAL signal.
1
Press OPERATE.
• "P-ON" will appear briefly on the display panel.
2
Press OPEN/CLOSE to open disc loading tray.
3
Place the chosen disc in the tray, with the label
facing up.
4
Press PLAY.
• Playback starts automatically.
5
Press STOP to stop playback.
NOTE:
• DVDs may have a region code. Your DVD player will not
play discs that have a region code different from the
region code of your DVD player.
DVDs may contain menus to navigate the disc and access
DVD
CD
special features. Press the appropriate numerical key or use
Arrow ( L / K / B / s ) to highlight your selection in the DVD
menu and press ENTER to confirm.
NOTE:
1
2
3
4
1
2
3
1
2
– 12 –
General Features
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
Disc menus
Press MENU.
• The DVD's main menu will appear.
If a title menu is no available,
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
Title Menu
Press TITLE.
• The title menu will appear.
If a title menu is no available,
appear on the TV screen.
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
Pause
During playback, press PAUSE.
• Playback will pause and sound will be muted.
To continue playback, press PLAY.
DVD
symbol may
DVD
symbol may
DVD
CD
EN
Advertisement
Table of Contents
