Sharp DV-S1X Operation Manual page 10

SETTING UP YOUR DVD PLAYER
C C Digital Connection
You can make this connection using either a coaxial digital cable or an optical digital cable.
Optical digital cable
To optical digital
input jack
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.
C C Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD
Play the disc as you normally would, with the audio mode set to "L+R". With a digital connection, audio of a disc recorded
with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded in Dolby Digital (5.1 channel), Dolby Surround
(Pro Logic), DTS or MPEG Audio.
You should use an analogue connection to play Dolby Digital (5.1 channel) and MPEG Audio. (Dolby Surround (Pro Logic)
and DTS audio cannot be produced with an analogue connection).
Discs with linear PCM audio should play normally.
AUDIO OUT
DIGITAL
OPTICAL COAXIAL R
To OPTICAL
DIGITAL OUT
or
jack
Coaxial digital cable
(commercially available)
(commercially
available)
DIGITAL IN
OPTICAL COAXIAL
To coaxial digital
input jack
VIDEO OUT
COMPONENT
Y C
R
S-VIDEO
L VIDEO C
B
To COAXIAL
DIGITAL OUT
jack
– 10 –
DVD Player
Audio equipment with
optical/coaxial digital input jack
EN