Optional Audio Connection - Sharp DV-560H Operation Manual

Optional Audio Connection

Connecting to an AV Amplifier with
5.1ch Input Connectors Supporting
Dolby Digital (AC-3) or Audio MPEG
Version 2.0
This DVD player contains a Dolby Digital (AC-3) or
Audio MPEG Version 2.0 decoder.
This enables the playback of DVDs recorded in Dolby
Digital or Audio MPEG Version 2.0 without the need for
an optional decoder with Dolby Digital or Audio MPEG
Version 2.0 processing.
When the DVD player is connected to an AV amplifier
with 5.1ch connectors, you can enjoy theatre-quality
audio right in your home when playing discs recorded
in Dolby Digital or Audio MPEG Version 2.0.
1 TV set (sold separately)
2 DVD player
3 Video/audio cord (supplied)
S-video cord (supplied) (See
4 Amplifier with 5.1ch input connectors
(commercially available)
5 Audio cords (commercially available)
6 To audio input connector (CENTER)
7 To audio input connector (SUBWOOFER)
8 To audio input connectors (SURROUND L
9 To audio input connectors (FRONT L
0 Centre speaker
q Front speaker (Left)
w Front speaker (Right)
e Subwoofer
r Surround speaker (Left)
t Surround speaker (Right)
(0-t sold separately)
For LINE1 OUT connection, see below.
Placing the DVD player near a tuner or radio could
cause interference during AM broadcast reception. If
this occurs, move the tuner or radio further away.
The speaker connections describe the example used
here. For more information, refer to the Operation
manual for your AV amplifier.
Connecting to a Monitor or TV
Equipped with a 21-pin Euro-SCART
Connector
When connecting the player to a TV set equipped with a
21-pin Euro-SCART connector, use a 21-pin Euro-
SCART cable (commercially available) connected to the
LINE1 OUT connector instead of the video/audio cable
supplied with the player connected to the VIDEO OUT
connector.
Set the S-VIDEO OUT, VIDEO OUT/Y, Cb, Cr selector
switch to S-VIDEO OUT, VIDEO OUT setting.
1. If you switch the DVD player on while you are watching a TV broadcast, the TV screen automatically
switches to AV mode and starts showing the DVD image.
2. If you press the STANDBY button on the DVD remote control while you are watching a DVD disc on the
TV, the DVD image disappears and the picture reverts to the original image.
If you then press the PLAY button on the DVD player, the DVD image returns.
On some TVs, the above operations may not work as described.
on page 12)
A
R)
•
R)
•
1
3 3
FRONT SURROUND CENTER DIGITAL
OUT
AUDIO
L
OUT
S-VIDEO OUT
VIDEO OUT
SUB
R
WOOFER
VIDEO
OUT
S-VIDEO
Y Cb Cr
OUT
5 5 5
7
9 8 6
q
e
r
FRONT SURROUND CENTER DIGITAL
OUT
AUDIO
L
OUT
S-VIDEO OUT
VIDEO OUT
SUB
R
WOOFER
VIDEO
OUT
S-VIDEO
Y Cb Cr
OUT
LINE1 OUT
FRONT SURROUND CENTER DIGITAL LINE1 OUT
OUT
AUDIO
L
OUT
S-VIDEO OUT
SUB VIDEO OUT
R
WOOFER
CLASS 1
VIDEO
LASER PRODUCT
OUT
S-VIDEO OPTICAL
Y Cb Cr DIGITAL OUT
OUT
"S-VIDEO OUT, VIDEO OUT" position
2
LINE1 OUT
FRONT SURROUND CENTER DIGITAL
OUT
AUDIO L
OUT
S-VIDEO OUT
SUB VIDEO OUT
R
WOOFER
VIDEO
OUT
OPTICAL
S-VIDEO
Y Cb Cr DIGITAL OUT
OUT
"S-VIDEO
OUT, VIDEO
LINE1 OUT
OUT" position
OPTICAL
DIGITAL OUT
4
0
w
t
LINE1 OUT
OPTICAL
DIGITAL OUT
21-pin
Euro-SCART
cable
13
GB