Remote Control Preparation - Sharp DV-560H Operation Manual

Remote Control Preparation

Inserting the Batteries
First, install the batteries as detailed below. Fit two R6 (UM/SUM-3 or AA) 1.5 volt batteries (included) or
equivalent.
If the remote control stops working, insert new batteries.
Ensure the batteries are inserted correctly, matching the polarities (
Do not subject the remote control to shock, water or excessive humidity.
The remote control may not function if the DVD Player sensor is in direct sunlight or any other strong light.
Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries
properly.
Do not mix old and new batteries, or mix brands in use.
Remove the batteries if you will not use the remote control for an extended period of time.
Loading the Batteries
1
Open the battery cover.
Open the lid in the direction of the arrow.
2
Load the batteries.
Load the two R6 (UM/SUM-3 or AA) batteries supplied with the
remote control so that the battery poles
tioned as indicated.
3
Close the battery cover.
Press the lid in the direction of the arrow.
±
± and — are posi-
/ ) indicated in the remote control.
—
11
GB