Monitoring Your Projectors - Epson PowerLite 745c Manual

You see this screen listing all registered projectors:
Note: To delete a projector from the list, highlight the
projector name, and click
5. Click . You see the status of each of your registered
Close
projectors on the main EMP Monitor screen:

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
These let you see which projectors are currently being used,
from which source (or port) they are projecting an image, and
if a problem occurs.
Status icon Video Source icon
Note: To monitor a projector when it's in standby mode (plugged
in but not projecting), you must first select
setting in the projector's Extended menu.
Standby Mode
For detailed status information, select the projector and click
.
View details
.
Delete
Error icon
as the
Network ON
Epson PowerLite 745c Projector
The following tables explain the status, video source, and error
icons. (Additional unsupported icons also appear.)
Status icons
(green)
(dark)
(green)
(dark)
Video source icons
Error icons
8/04
Projecting; no problems
Turned off; no problems
Projecting; problems detected
Turned off; problems detected
Network error (for example, not connected to
network or power cable disconnected).
You may also see this error if Network OFF is
selected in Standby Mode.
Computer/Component 1
Computer/Component 2 (not available for the
PowerLite 745c)
S-Video
Video
EasyMP
Lamp replacement notification (the lamp is
nearing the end of its life; see page 22)
High-speed cooling in progress (the
projector is getting too hot but continues to
operate)
Overheating (projection turned off
automatically)
Lamp out or lamp cover open
Fan error
Sensor error
Internal problem
Epson PowerLite 745c Projector 19
-