Selecting The Audio Playback Mode - Sharp ViewCam VL-WD450E Operation Manual

Advanced Features
Playback
Selecting the Audio Playback
Mode
You can select any of the following audio
playback modes.
Audio 1+2
• 12-bit recording in stereo (Audio 1 and Audio
2 channels)
• 16-bit recording in stereo (left and right
channels)
Audio 1
• 12-bit recording in stereo (Audio 1 channel
only)
• 16-bit recording in mono (left channel only)
Audio 2
• 12-bit recording in stereo (Audio 2 channel
only)
• 16-bit recording in mono (right channel only)
71
1
Play back a Mini DV cassette with
dubbed audio.
2
Press the MENU/DISPLAY button until
the menu screen appears.
3
Select V, then press r on the
Operation button. Select "AUDIO" (1),
then press r (2).
PL AY BACK SE T
AUD I O DUB
AUD I O
P I C. E F F EC T
PB E F F EC T
MULTI F RAME
4
Press d or y to select the desired
audio playback mode, then press e.
AUD I O
5
Press the MENU/DISPLAY button to
turn off the menu screen.
• The selected audio playback mode
indicator is displayed.
Note:
• The audio playback mode indicator, "AUDIO", is
displayed in different colours depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, and a green
display, 16-bit recording mode.
+
1 2
1
2
+
1 2
AUDIO1 2 +
Audio playback
mode indicator