Specifications; Maintenance - Sharp QT-CD110H Operation Manual

<P=005>
(Continued)
I
Recording from the built-in radio
1
Set the FUNCTION switch to AM or FM AUTO.
Tune in to the station to be recorded.
2
Load a blank cassette into the cassette compart-
ment.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again.
Erasing a recorded tape
1
Set the FUNCTION switch to TAPE.
2
Load the tape to be erased into the cassette
compartment.
3
Press the RECORD button.

MAINTENANCE

Internal care
Do not touch the Laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
After long use, the deck's heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours of
playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser's
instructions carefully before use.
External care
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or
other chemicals.
TINSZ0001SJZZ

SPECIFICATIONS

SHARP reserves the right to make design and
specification changes for product improvement
without prior notice.
General
Power source: AC 230 - 240 V, 50 Hz
Power
consumption: 11 W
Output power: PMPO; 28 W (total)
Speakers:
Output
terminal:
Dimensions:
Weight:
Radio
Frequency
range:
Tape recorder
Frequency
response:
Signal/noise
ratio:
Wow and
flutter:
Motor:
Bias system:
Erase system: Magnet erase
Compact disc player
Type:
Signal
readout:
Audio
channels:
Quantization:
Filter:
D/A converter: 1-bit D/A converter
Wow and
flutter:
SHARP CORPORATION
QT-CD111H/110H(SEEG) TINSZ0001SJZZ
DC 12 V "D" size (UM/SUM-1, R20
or HP-2) battery 8
MPO; 8.4 W (4.2 W + 4.2 W)
(AC operation, DIN 45 324)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, DIN 45 324)
10 cm (4") full-range speaker x 2
Headphones; 16-50 ohms
(recommended; 32 ohms)
Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
3.2 kg (7.1 lbs.) without batteries
FM; 87.5 - 108 MHz
AM; 526.5 - 1,606.5 kHz
50 - 14,000 Hz (Normal tape)
50 dB
0.3 % (DIN 45 511)
DC 12 V electric governor
AC bias
Compact disc
Non-contact, 3-beam semi-
conductor laser pickup
2
16-bit linear quantization
4-times oversampling digital filter
Unmeasurable
(less than 0.001% W. peak)
B9810.YT