Setting The Viewcam To Full Auto Mode; Macro Shots - Sharp ViewCam VL-E89E Operation Manual

Setting theVIEWCAM to Full
Auto Mode
This VIEWCAM is equipped with auto focus,
auto white balance, auto exposure, and auto
shutter speed functions. Set the VIEWCAM to
Full Auto
mode and you can record high-quality
pictures easily.
MENU
) button
I
MbDE DISPLAY button
n
button
1
While the VIEWCAM is
in Camera
mode,
press
the MENU button until m
appears.
MENU
I I
2 If "MAN'L FOCUS" is displayed, press
the ) button to change it to "FOCUS".
The auto focus function is now
operating.
3 If "SCENE MENU" is not displayed
above the
n
button, press that button
until "SCENE MENU"
appears.
The auto
white balance, auto exposure, and auto
shutter
speed functions
are now
operating.
I
SPORT
I I I
4 Press the MODE DISPLAY button. The
button control indicators disappear, and
the "AUTO" indicator is displayed on the
monitor.
II---
MODE DISPLAY
AUTO
Macro Shots
This VIEWCAM
lets you shoot close-up images
of small objects such as flowers and insects, or
make title frames for your videos. When you
want to record a magnified image of a subject
which
is
within approximately 1.5 m of the
VIEWCAM, do not zoom in on it. Instead, zoom
out all the way by pushing the Power Zoom
lever to the W side, and then move the
VIEWCAM closer to the subject until you obtain
the desired angle of view. The VIEWCAM will
automatically focus on the subject when the
lens is set for the widest angle.
Notes:
l
When you are recording a macro shot. be sure
that the subject receives sufficient illumination.
l
It is recommended that you use a tripod for
recording macro shots, to prevent image shake.
_