Setting The Viewcam To Full Auto Mode - Sharp VIEWCAM VL-A110U Operation Manual

Useful Features
Setting the VIEWCAM to Full
Auto Mode
This VIEWCAM is equipped with auto focus,
auto white balance, and auto exposure
functions. For easy, high-quality camera-
recording, record subjects in Full Auto mode.
If "AUTO" is not displayed even when the
DISPLAY button is pressed, perform the
procedure below to set the VIEWCAM to Full
Auto mode.
1
In Recording Standby mode, press the
MENU button until
EFF." is not displayed above the D
button, press this button until "PIC. EFF."
appears.
B / W
E F F
2
Press the MENU button until
pears. If "MAN'L FOCUS" is displayed,
press the D button to change it to
"FOCUS".
MAN ' L
FOCUS
3
If "WHITE BAL." is displayed in yellow,
press the WHITE BAL. button
• "WHITE BAL." returns to blue.
WH I T E
BA L.
35
appears. If "PIC.
P I C GAMA Q K
E F F E F F REW
ap-
WH I T E EXPO
F OCU S SURE
BA L.
A
( ) .
Blue
WH I T E EXPO
F OCU S BA L. SURE
4
If "EXPOSURE" is displayed in yellow,
press the EXPOSURE button ( ) to
display the exposure setting screen,
then press the AUTO button (B).
• The exposure setting screen turns off
and "EXPOSURE" returns to blue.
EXPO
SURE
AUTO
5
Press the MENU button until
appears. If "SCENE MENU" is not
displayed above the A button, press
this button until "SCENE MENU"
appears.
SPORT
6
Press the DISPLAY button.
• The Operation button indicators
disappear, and "AUTO" is displayed on
the screen.
E X POSURE
AUTO E X I T
Blue
WH I T E EXPO
F OCU S BA L. SURE
T I - RE - SCENE
T L E TURN 1 6 9 MENU
AUTO
Full Auto mode indicator