Table of Contents
Advertisement
Listening to USB mass storage device/
DK-UH2
DK-UH2(BK)
MP3 player (continued)
ENGLISH
4
Select desired file to be played back by pressing the
button. (Folder mode off)
5
Press the
/
Playback will start and the track number and time counter
will be displayed.
Title, Artist and Album name are displayed if they are recorded
in the USB memory device.
Display content can be changed by pressing the DISPLAY button
on remote control.
Track Number and Time Counter
(
) Clock
Album
(
) Only appears when clock is already set.
Note:
To pause playback:
Press the
/
button at main unit or remote control.
Auto power off function:
In the stop mode of USB operation, the main unit enters the power
stand-by mode after 15 minutes of inactivity.
E-13
button.
To remove USB memory device
1
Press the
or
until "UNPLUG OK" appears on FL display.
2
Disconnect USB memory device from the USB terminal.
File Name
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Title
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
Artist
The USB memory device connected via USB hub cannot be
operate by this unit.
If "NO SUPPRT" is displayed, it means the file is either a
"Copyright protected WMA file" or is a "Not supported playback
file".
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
External HDD-storage cannot be played back by this unit.
In case the data inside the USB memory device is large, it may
take a longer time for data to be read.
button on the main unit or remote control. Wait
U S B
Advertisement
Table of Contents
