Microphone Echo; Mic Priority; Voice Cancel; Voice Changer - Sharp PS-990 Operation Manual

General control (continued)

Microphone echo

■
Rotate the ECHO VOL knob to adjust the echo.

Mic priority

■
● Press MIC Priority button to switch the MIC
Priority mode on and off.
● The "P-ON" will be shown on the display when
the MIC Priority is switched on and "P-OF" will
be shown when off.
● If you speak with a microphone when MIC
Priority is on, the sound of the music being
played will be reduced.

Voice cancel

■
● Press the VOICE CANCEL button to switch the
VOICE CANCEL mode on and off.
● The "ACON" will be shown on the display when
the VOICE CANCEL mode is switched on and
"ACOF" will be shown when off.
● When VOICE CANCEL mode is on, the center
vocal voice of the song is canceled or reduced
and becomes smaller.

Voice changer

■
● Press the VOICE CHANGER button to change 4
types of voice effect.
● The display shows EFE1 to EFE4 and EFE0
(VOICE CHANGER OFF).

Mute function

■
Press the MUTE button to mute the sound. The "U-
00" will be shown on the display when switched on.
Press again to restore the sound.
PS990_IM_EN.indd 10 PS990_IM_EN.indd 10

USB operation

Listening to a USB device

■
This unit provides a USB port for music playback.
1. Connect a USB memory stick or press the
function button.
Connect the USB Memory Stick to the USB
playback port. If you already have a memory
stick connected to the port, press the function
button repeatedly to select the USB function.
2. The display will show the total number of folders
for 2 seconds and, then, show the total number of
playable tracks for 2 seconds and automatically
start to play the 1st track of the USB device. The
elapsed time will be shown on the display.
3. To pause playback press the
"PAUS" will be shown on the display.
4. To resume play, press the
The elapsed time will be shown on the display.
5. To select a desired track, press the
button either while playing or pausing
until the desired track appears on the display.
The unit will start playing automatically.
6. Press and hold the
forward and backward until the desired point
is reached, then release the button for normal
playback. Playback will start from this point.
Caution
To prevent harmful interference, always connect
USB devices directly to the unit. Do not use a USB
extension cable to connect USB devices to the unit.
To select the USB play mode, press and hold the
PLAY MODE button. The mode will be changed as
following order.
● FOLDER mode, the display shows "Fold".
● +/-10 Track jump mode, the display shows
"ud:10".
● One Track Repeat mode, the display shows
"ONE".
● Folder Repeat mode, the display shows "FO-r".
● All track Repeat mode, the display shows "ALL".
● Random Play mode, the display shows "rAnd".
● Normal play mode, the display shows "ordE".
E-10
button.
button.
or
or button to fast
7/11/23 12:42 PM 7/11/23 12:42 PM