Sharp XL-UH2080H Operation Manual page 17

Random play
The tracks on the disc can be played in random order automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control.
Press the / button.
To cancel random play:
Press the PLAY MODE button.
"R" will disappear.
Notes:
If you press the button during random play, you can move to
the track selected next by the random operation. On the other
hand, the button does not allow you to move to the previous
track. The beginning of the track being played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
(CD ) button. Otherwise, the disc will play continuously.
Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press
the MEMORY button on the
remote control to enter the
programming save mode.
2
Press the direct search buttons
on the remote control to select
the desired track.
You can also select a track by pressing the
3
Press the MEMORY button to
save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
5
Press the (CD ) button.
The total number in memory will
appear.
6
Press the / button to start playback.
XL-UH2080H
Selected track number
or button.
17