Sharp XL-UH2080H Operation Manual page 15

5
Press the OPEN/CLOSE button to close the disc tray.
Total
Indicator
[CD]
Total number of
Total playing time
tracks on the disc of the disc
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6
Press the / button to start playback.
After the last track is played, the unit will stop automatically.
To remove the discs:
In the stop mode, press the OPEN/CLOSE button.
Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
MP3 indicator
WMA indicator
[MP3/WMA]
Total number
of files
Disc play indicator
Various disc functions
Function Main unit Remote
control
Play
Stop
Pause
Track up/
Track
down
Fast
forward/
Fast
reverse
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unfinished writing, can still be
played.
Operation
Press in the stop mode.
Press in the playback
mode.
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Press in the playback or
PRESET stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in
the playback mode.
PRESET
Release the button to
resume playback.
XL-UH2080H
15