Advanced Cd Or Mp3/Wma Disc Playback - Sharp XL-UH2080H Operation Manual

Advanced CD or MP3/WMA disc playback

XL-UH2080H
Direct track search
By using the direct search buttons, the desired tracks on the current
disc can be played.
Use the direct search buttons on
the remote control to select the
desired track whilst playing the
selected disc.
The direct search buttons allow you to select up to number 9.
When selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "1" button.
3 Press the "3" button.
B. For example, to choose 130
1 Press the "+10" button twice.
2 Press the "1" button.
3 Press the "3" button.
4 Press the "0" button.
Notes:
A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
16
Selected track number
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button once.
Press the / button.
To repeat all tracks:
Press the PLAY MODE button twice.
Press the / button.
To repeat desired tracks :
Perform steps 1 - 6 in "Programmed play" section on page 19 and
then press the PLAY MODE button once.
Press the / button.
To cancel repeat play:
Press the PLAY MODE button again until " " disappears.