Table of Contents
Advertisement
■ Trigger Out
Settings > Operation > Trigger Out
Select
to have the
Power
projection screen when the projector is running. Or select
a motorized anamorphic lens (commercially available) when the
Horiz. Squeeze
The PowerLite Pro Cinema 61000 has two settings,
that let you use its two
Note: If you change this setting, the new setting will take effect the next time you turn the
projector on.
■ Illumination
Settings > Operation > Illumination
Turn off this setting to deactivate the lights on the projector's Ppower button and power
light. Use this setting if you find the lights distracting in a darkened room.
■ Sleep Mode
Settings > Operation > Sleep Mode
Turn off this setting if you don't want the projector to enter sleep mode. (Sleep mode
shuts the projector off automatically when there is no video signal.)
Select
,
5min.
10min.
conserves power and extends the life of the lamp.
To turn the projector back on, press the Ppower button on the remote control or the
projector.
■ Lens Lock
Settings > Lock Setting > Lens Lock
Disables the focus, zoom, and lens shift. If you try to use one of these functions, a
icon appears on the screen.
■ Child Lock
Settings > Lock Setting > Child Lock
Lets you lock the Ppower button on the projector's control panel to make it more
difficult for a child to turn on the projector. See page 29 for more information.
Trigger out
aspect ratio is selected.
ports for independent functions.
Trigger Out
, or
as the length of time before shutoff; decreasing the time
30min.
port output a 12-volt signal to lower your
Anamorphic Wide
Trigger Out 1
to engage
Anamorphic Wide
and
Trigger Out 2
Making Detailed Adjustments
or
,
lock
45
Advertisement
Table of Contents
