Video Signal; Sleep Mode; Child Lock - Epson PowerLite Home Cinema 8700 UB User Manual

■ Video Signal

Settings > Input Signal > Video Signal
Leave this setting on
NTSC or PAL (for standard TV formats).
■ Component
Settings > Input Signal > Component
Change this setting to match the type of equipment connected to the Component port.
For component video, select
or select
■ Trigger Out
Settings > Trigger Out
Turn on this setting to have the
projection screen when the projector is running. For the Home Cinema 8700 UB, select
to signal when your projector is turned on, or
Power
motorized anamorphic lens (commercially available) when that aspect ratio is selected.
Note: If you change this setting, the new setting will take effect the next time you turn the
projector on.
■ Illumination
Settings > Illumination
Turn off this setting to deactivate the lights on the projector's Ppower and
buttons. Use this setting if you find the lights distracting in a darkened room.

■ Sleep Mode

Settings > Sleep Mode
Turn off this setting if you don't want the projector to enter sleep mode. (Sleep mode
shuts the projector off automatically when there is no video signal.)
Select
5min.
conserves power and extends the life of the lamp.
To turn the projector back on, press the Ppower button on the remote control or the
projector.

■ Child Lock

Settings > Child Lock
Lets you lock the Ppower button on the projector's control panel to make it more
difficult for a child to turn on the projector. See page 32 for more information.
48
Making Detailed Adjustments
so the projector can automatically interpret the format, such as
Auto
Auto
or to manually select your video equipment's signal.
YCbCr YPbPr
, , or
10min. 30min.
to let the projector automatically interpret the signal;
port output a 12-volt signal to lower your
Trigger out
as the length of time before shutoff; decreasing the time
to engage a
Anamorphic Wide
source