Sleep Indicator - Sharp XL-HP404E Operation Manual

Micro component system
Hide thumbs Also See for XL-HP404E:
Table of Contents

Advertisement

Timer and sleep operation (continued)
XL-HP404E
" Sleep operation
The radio, compact disc and cassette tape can all be turned off
automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
4
Press the
or
(Maximum: 3 hours - Minimum: 1 minute)
! 3 hours - 5 minutes
! 5 minutes - 1 minute
5
Press the MEMORY/SET but-
ton.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is remaining sleep time.
! The remaining sleep time is displayed for about 10 seconds.
! You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
28
button to select the time.
5-minute intervals
1-minute intervals
or
button to select
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP OFF", and press the MEMORY/SET button.
" To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record
radio programmes whilst sleeping.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 25 - 26).
Timer playback or
recording setting
Sleep timer setting
1 minute - 3 hours
Sleep operation will
Timer playback or recording
automatically stop.
start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
03/10/20
XL-HP404E(A)3.fm
or
button to select
End time
Desired time
TINSEA009AWZZ

Advertisement

Table of Contents
loading

Table of Contents