Reference Page 1. Cooling Fan; Ac Power Lead - Sharp XL-HP404E Operation Manual

System connections (continued)
XL-HP404E
! AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
Notes:
" The unit will start the tape initialisation when plugged in to the AC
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
Cooling fan:
This product is equipped with a cooling fan inside, which begins to
run at a specified volume level for better heat radiation.
10
! Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration
mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The demonstration mode will be
cancelled and the display will disap-
pear.
To return to the demonstration mode:
Wall socket
When the unit is in the power stand-by mode, press the X-BASS/
(AC 230 - 240 V, 50 Hz)
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
! External FM aerial
Use an external FM aerial if you require better reception. Consult
your dealer.
03/10/20
External FM aerial
XL-HP404E(A)1.fm
TINSEA009AWZZ