Viewing On A Television - Ricoh Caplio 300G Operation Manual

Viewing on a Television

You can also view the still images and movies you have taken on a TV screen. The camera displays
everything on the TV screen just as on its LCD Monitor.
To use your television for viewing, connect your camera to the television with the video cable that
came with your camera.
To view still images and/or movies on a
television, follow the steps below.
Buttons used here
Securely connect the video cable to the
Video In terminal on the television.
• If you connect the video cable to your video recorder's In terminal, you can record what you have shot onto
video.
• Your camera is set to NTSC playback format (used in Japan and other countries) for use with television
equipment, etc. If the equipment you want to connect to uses PAL format (used in Europe and elsewhere),
then switch your camera to PAL format in the Setup Menu before connecting.
• When the video cable is connected to the camera, the LCD Monitor display will go off.
Chapter 1 / Section 4 Viewing Still Images and Movies
Make sure the power is off. Turn the camera
terminal cover's knob in the direction of the
arrow to open it.
Securely connect the video cable to the
Video Out terminal.
Set the television to "Video" mode. (Set the
input to "Video".)
For details, please refer to the operation manual for
the television.
Turn the camera's Mode Dial to
(Playback Mode).
Turn your camera on by pressing the power
button.
83