Table of Contents
Advertisement
I. Error Messages
If an error message is displayed on the LCD Monitor, follow the steps below.
Error Message
INSERT CARD
SET DATE
FILE NUMBER OVER LIMIT
UNMATCHED FILE
INSUFFICCIENT MEMORY. CONTINUE?
PROTECTED
WRITE-PROTECTED
PRINT SETTINGS CANNOT BE SET FOR
THIS FILE.
INSUFFICIENT MEMORY
FORMAT INTERNAL MEMORY
FORMAT CARD
CARD ERROR
WRITE TO CARD
NO FILE
CANNOT RECORD
If the countermeasures above do not remedy the problem, please contact the Ricoh Service Center, or the
store where you purchased your camera.
Countermeasure
A card is not loaded. Insert a card.
The date is not set. Set the date.
The file number limit has been exceeded. Please use another
card, or delete unwanted files.
A file that cannot be played back was selected.
Because there is not sufficient capacity on the card, all the files
cannot be copied. Use another card.
You are trying to delete a protected file.
The card is "Locked (write-protection)". Unlock the card.
This file (movies and other) cannot be selected for printing.
Files cannot be stored. Make sure there is enough free space,
or delete files.
The image print number limit has been exceeded. Select an
image and set the number to 0.
It is necessary to format internal memory.
The card is not formatted. Format the card.
Please reformat. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
The Number of remaining shots is 0. Switch to another card or
internal memory.
159
Appendices
Page
p.15
p.14
p.15
p.85
—
p.92
p.88
p.15
—
p.85
p.93
p.98
p.97
p.97
—
—
p.15
Advertisement
Table of Contents
